⎝⎛足球正网开户⎞⎠

Calibrator

no information

Product consultation
    • CBA-2310A strain calibrator
    • Model: CBA-2310A
      Country of origin: TML (Japan Tokyo Measuring Instrument)
      Uses: CBA-2310A is a strain calibrator capable of online calibration, suitable for automatic detection and calibration of static and dynamic strain gauges, conversion boxes, etc.
    • CBA-131A strain calibrator
    • Model: CBA-131A
      Country of origin: TML (Japan Tokyo Measuring Instrument)
      Uses: CBA-131A is a strain calibrator dedicated to the full-bridge method, suitable for the calibration of static and dynamic strain gauges.
    • CBM-122A / CBM-352A strain calibrator
    • Model: CBM-122A / CBM-352A
      Country of origin: TML (Japan Tokyo Measuring Instrument)
      Uses: CBM-122A / CBM-352A is a highly stable strain calibrator, used for operation inspection and sensitivity calibration of strain gauges.
    • CBM-123A / CBM-353A strain calibrator
    • Model: CBM-123A / CBM-353A
      Country of origin: TML (Japan Tokyo Measuring Instrument)
      Uses: CBM-123A / CBM-353A is a highly stable strain calibrator, used for operation inspection and sensitivity calibration of static strain gauges and conversion boxes.
    • CB-2R strain calibrator
    • Model: CB-2R
      Country of origin: TML (Japan Tokyo Measuring Instrument)
      Uses: CB-2R is a highly stable strain calibrator, used for sensitivity calibration and zero drift monitoring of strain gauges excited by DC bridges, suitable for the management of long-term measuring instruments.
  • Total 1 page / 5 records
  • Applications
    MIRA applied to bridge corrosion detection

    Project: IL's New Holland I-10 Bridge Inspection Plan: Ultrasonic equipment is placed on the prestressed bridge box beams to detect stirrup corrosion. The corroded and uncorroded areas at the bottom of the differential box beam, along the axis perpendicular to the long axis of the MIRA equipment and parallel to the intersection

    MIRA applied to the inspection of new road joints

    Project: I-57 Bridge Inspection Plan near Monee, IL: Deploy ultrasonic equipment on newly constructed roads to classify the quality of the joints. Four seams will be identified and scanned. The first three seams are qualified by MIT scan, and the fourth seam is unrecognizable

    MIRA 1040 applied to asphalt bridge deck sweep

    Project: IL New Berlin I-72 Bridge Inspection Plan: Deploy an ultrasonic device on the deck of the asphalt pavement to determine the stability of the deck, and scan upward from the bottom of the deck. The southbound carriageway of the bridge was recently rolled over and saw two areas where the asphalt deteriorated badly

    It only takes a minute! ShapeMetriX3D rock

    The high-definition camera up to 30.4M takes images from two different angles of the designated area of the rock mass. The entire data collection process takes only 1 minute and the accuracy can reach the centimeter level.

    Case sharing | PRIMAX 2500 heavy hammer

    In pavement design and load capacity evaluation, the Drop Weight Deflectometer (FWD) is currently one of the most advanced pavement strength non-destructive testing equipment in the world. Its measurement results are relatively accurate and the information is large. Compared with the traditional Beckman beam measurement deflection, it has

    Apageo Mena side pressure gauge should be used in a college

    Laboratory test of Apageo Mena side pressure gauge in a college. The side pressure test can be traced back to Germany in the 1930s. This is also the prototype of the earliest single-chamber side pressure instrument. After several generations of efforts, until 1957, the French engineer Louis-Mena

    PAC acoustic emission system is used to study rock

    1. One of the non-destructive testing methods for the concept of acoustic emission system. The stress concentration in the local area of the material, the rapid release of energy and the generation of transient elastic waves is called Acoustic Emission (Acoustic Emission, AE for short), sometimes also called stress wave emission. Material in stress

    A1040 MIRA array ultrasonic tomography

    MIRA ultrasonic tomography scanner uses combined detection synthetic aperture focusing technology to focus on every point in the half space. The data set is composed of the information collected by all the measurement pairs of the instrument antenna. As a result, a cross-sectional view of the test body is generated, which is different

    Official WeChat
    official Weibo
    Infrared thermal imager, slope monitoring, inclinometer, strain gauge, pressure aging instrument High-tech test instrument comprehensive solution provider
    • 400-700-9998
    • Service hours: Monday to Sunday 9: 00-18: 00
    • E-MAIL: marketing@epc.com.hk
    大陆总部地址:广州市天河区体育东路116号财富广场西塔2301 香港公司地址:香港葵涌梨木道79号亚洲贸易中心12楼 热搜关键词:静态数据采集仪,手持式应变记录仪,多通道动态数据记录仪,汽车六分量测试系统,高速扩展扫描箱,超小型动态测试仪,海上风电 地震预警,地震监测,透火焰热像仪,无电缆静力触探,路面材料试验机,高温高压岩石三轴仪,长基距变形传感器,分布式光纤应变监测,静力水准仪 Copyright © 2008 ~ 2018 Earth Products China Ltd. all rights reserved. Guangdong ICP No. 12064742 Continental Headquarters Address: 2301 West Tower, Fortune Plaza, 116 Tiyu East Road, Tianhe District, Guangzhou City Hong Kong Company Address: 79 Limu Road, Kwai Chung, Hong Kong Hot search keywords on the 12th floor of Asia Trade Center : static data acquisition instrument, handheld strain recorder, multi-channel dynamic data recorder, automotive six-component test system, high-speed expansion scan box, ultra-small dynamic tester, offshore wind power earthquake early warning , Earthquake monitoring, flame penetration thermal imaging camera, cableless static penetration test, pavement material testing machine, high temperature and high pressure rock triaxial instrument, long base distance deformation sensor, distributed fiber strain monitoring, static level
    ⎝⎛足球正网开户⎞⎠
    the products world
    solution
    about us
    必赢真人娱乐 真人游戏平台注册 七乐彩 星力捕鱼